Louis! Posted August 28, 2011 Posted August 28, 2011 I know what you mean, and I believe that it's physically impossible.
Reviar Posted August 28, 2011 Posted August 28, 2011 Could someone be so nice and add the grass quartertiles to the H2H5 bench and send it my way. For some reason it doesn't save any off those adds for me, but only on that bench >.< Regards// Reviar.
disneyfan1313 Posted September 15, 2011 Posted September 15, 2011 OK - I am asking this for my wife who plays RCT2 so I hope I am phrasing this the right way.. She is having a ton of trouble beating Fungus Woods without cheating... is there a trick to it? Thanks!!!
CorkscrewFoley Posted September 15, 2011 Posted September 15, 2011 Awhile back, I had some computer issues, more of a virus, and I had to get rid of everything I had. It happens, but the one thing I miss from RCT 2 object data are the food stands that were the marble blocks. I probably could find them again at RCTMart, but I don't have an account there. So would anyone have them, and be willing to send them my way. I'd be more than grateful. Tim.
mcjaco Posted September 19, 2011 Posted September 19, 2011 OK - I am asking this for my wife who plays RCT2 so I hope I am phrasing this the right way.. She is having a ton of trouble beating Fungus Woods without cheating... is there a trick to it? Thanks!!! Sure you are Reed. Sure you are.
CorkscrewFoley Posted September 19, 2011 Posted September 19, 2011 Something I've been wanting to know. What does each square represent in feet was? Example, is one square five feet or whatever in square feet?
Ace Of Spades Posted September 20, 2011 Posted September 20, 2011 ^I would assume it's 5 feet across a normal square tile, not sure though.
QueerRudie Posted September 20, 2011 Posted September 20, 2011 That's a good question; if you look at rise/run of the 'standard' lift hills, you'd be hard pressed for that square to be any less than 15x15 feet really... But that's a guess, of course.
Whisper91 Posted September 22, 2011 Posted September 22, 2011 My problem is: Now I have been checking around and haven't seen this yet, but anyways, my problem is, after using Zero Clearences (Absolute) and Restoring Clearences, a lot of objects are still zero clearenced if you want to call it that. Tree's are glitching as if ZC is still on. If there is a wall built, I can overlap it but when I overlap it with another object, the new object is in the way (the way it is suppose to work). But I don't know if its actually 8 cars. Because I tried different versions too and they all seem to react the same. I tried to make "Any Height Construction" and "Ultra Exciting Rides" but neither worked when I told them to. Maybe its because of Windows 7? or should I reinstall the game?
megalyte Posted September 25, 2011 Posted September 25, 2011 Does anyone use RCT2 on Windows 7? Best Buy has the 3-pack (Original, Wacky Worlds, Time Twister) and I want to know if it would work on my computer.
Whisper91 Posted September 25, 2011 Posted September 25, 2011 Does anyone use RCT2 on Windows 7? Best Buy has the 3-pack (Original, Wacky Worlds, Time Twister) and I want to know if it would work on my computer. Works fine on my Windows 7. You will just notice some graphics difference with the load/save game menu, but it doesn't ruin the experience.
A.J. Posted September 25, 2011 Posted September 25, 2011 +1 to that. Triple Thrill Pack works great on my Windows 7 Professional partition.
Coupon Posted September 25, 2011 Posted September 25, 2011 It works pretty good on Windows 7, it has never crashed for me.
10ryansmith Posted September 28, 2011 Posted September 28, 2011 Would anyone like to help me with supporting a B&M Invert and Standup? Just PM me if you are interested. Thanks!
CorkscrewFoley Posted September 28, 2011 Posted September 28, 2011 Has anyone come out with the new modded cars for Superman (Reverse Freefall Coaster)?
djbrcace1234 Posted September 28, 2011 Posted September 28, 2011 Has anyone come out with the new modded cars for Superman (Reverse Freefall Coaster)? I started on one, but I've been having so many issues with it considering it would be my first time doing something like that.
tdub96 Posted September 29, 2011 Posted September 29, 2011 Im in need of somebody to take care of making some invisble huts for me on Project Patriot. Its nearly done, and i'd like to get that out of the way so I can finish the last few details. A 1% share when submitted goes to whoever helps me out.
djbrcace1234 Posted September 29, 2011 Posted September 29, 2011 Im in need of somebody to take care of making some invisble huts for me on Project Patriot. Its nearly done, and i'd like to get that out of the way so I can finish the last few details. A 1% share when submitted goes to whoever helps me out. Send it over, I'd be glad to do that for you. Would anyone like to help me with supporting a B&M Invert and Standup? Just PM me if you are interested. Thanks! I wouldn't mind this either. The sad thing for me is I just like building coasters, everything else just bores me out of my mind.
accelerate Posted October 11, 2011 Posted October 11, 2011 ^Agreed. Not only do builings bore me to death, I'm also terrible at them (as many people on this board would agree to ) If anyone needs help with supports, I could probably help. Just don't make me do a station.
CorkscrewFoley Posted October 11, 2011 Posted October 11, 2011 ^I'll do buildings for the front of my parks, but that's it.
drew9d9 Posted October 13, 2011 Posted October 13, 2011 -Well what helps me is that I go and find many buildings, terrain, or anything related to what I'm building. I normally get better results by basing something off of something realistic, rather than not. However, over time you should get the idea(that is if you are sticking with one theme. -When making a ride, don't put it at the ground level, it just shows that it has little to no support. It will probably sink down if it where real. -If your park is bigger than 150x150 and your going for one theme. Then your going for a real challenge there. -When trying to create a custom coaster/ride, you must either merge, or hack it in order to perfect it -When your making a pond, lake, or any body of water. make the "hole" 10ft(or more) below the 0pt, and fill it up to at least 5 feet in between. This gives it a bit more realistic feeling. -When making a 4-D Coaster, try to leave at least 3 spaces C - T - C C = Car Space T = Track -If you want more air on a coaster, then make a hill at least 25feet lower than the previous one, and make sure its transitions are smooth. EX - Using the "Hyper/Giga/B&M" Hill -When making a stadium(realism), try to make it as big as you can. Also think of what your shows theme is, and what audience will see it(this may sound lame, but its one of those "little" things) -When making a dark ride, try creating a facade, so you don't overdue the theme. -For compact coasters, make a fence around the area of the ride you want it in, and build it there. -Mix up your pathway types a little I'll think up of more when I'm more "awake" How do you merge track?
funkeymon Posted October 13, 2011 Posted October 13, 2011 Does anyone know the dat. file for the Vekoma SLC coaster? Thanks.
accelerate Posted October 13, 2011 Posted October 13, 2011 /\/\ It's actually quite complicated. I think ther's a thread in NE's ask the experts section. /\ I think it's VEKSLC, but I may be wrong.
PSiRockin Posted October 14, 2011 Posted October 14, 2011 Merging is actually somewhat simple. Scroll down on this a little. http://www.coasterforce.com/forums/viewtopic.php?t=9657
CCI Posted October 17, 2011 Posted October 17, 2011 On the merging topic would someone be willing to merge a ride for me? I tried I got it to work briefly then I got an error Trapper. Now ever time I try it it says Track not complete when its merged.. Pm me if willing and I'll send the link over.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now