Jump to content
  TPR Home | Parks | Twitter | Facebook | YouTube | Instagram 

Recommended Posts

Posted

RCT3 Wild has a bizarre tower coaster that I origonally thought was a crude attempt a Euro-Fighter. As it turns out, this was the coaster they were emulating:

 

http://www.youtube.com/watch?v=W6ssxx7QZhw

 

It used to operate on a fair circuit under the name "Cool and Fresh", but is now being built at the "DippieDoe" Amusemet park in The Netherlands.

 

The ride itself seems a bit shaky, but is still a pretty cool concept. Will anyone be heading out to DippieDoe next summer to give it a whirl? Looking at the real version, compared to the RCT version, it looks like the RCT creators nailed it

amr027.jpg.2fbd026831d50393eb6bda289922724e.jpg

To those who play RCT3, this may look familiar.

  • Replies 35
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted

A bit shaky? This coaster beats the hell out of you... It is not more than a drop with brake, a Loop with awesome high g`s, brake, s-curve and brake. That`s it.

 

As far as I know, both Gerstlauer and SBF developed their more than 90 degree tower coasters at the same time for travelling.

 

Greetings

schrubber

Posted

Wow, a carnie Eurofighter, might be fighting for your life after a ride on that one.

 

I'd settle for one downunder, how's about it, Sydney Royal Easter show?

Posted

Bakken in Denmark once had some plans about building such kind of coaster. Fortunately it didn't become a reality

 

PS. This might be one of the ugliest coasters ever made in history. And steel wires are holding it - looks so amazingly safe, now I want to ride it

Posted

The way that track flexes while going thorugh the loop is quite scary. You can see the wires deflecting because the track moves so much. Fatigue will be an issue with this thing for sure.

 

(i'd still give it a try)

Posted

Cool. I remember that coaster type back when I was playing RCT3, thinking it was real badly designed eurofighter. Who knew its a real coaster like that? But I don't think I want to get on that anytime soon...

Posted

It looks like an ugly, over-braked piece of crap. Why couldn't they just deisgn it for the speed it goes instead of braking it like that? And why not add a little something more on? It barely has a layout!

Posted

I read about this coaster last year in the European Coaster Club magainze called "First Drop".

 

It is a very intense coaster, shame it's not longer with a few airtime hills and corners, I would not try it cos A) the loop is very small with high "G's" and B) A vertical drop.

Posted

It looks like a cool concept: you go over the top, there's nothing underneath you and suddenly you drop inwards. Looks pretty cool to me.

 

Too bad most people who rode it complain about the roughness.

Posted
PS. This might be one of the ugliest coasters ever made in history. And steel wires are holding it - looks so amazingly safe, now I want to ride it

 

You'd be amazed how many coasters use steel cables for support. Two right off the top of my head, Thunderbolt at Kennywood, and Manhattan Express in Las Vegas. And if you like to count it as a coaster, Superloops/Ring of Fire also uses cables.

Posted
PS. This might be one of the ugliest coasters ever made in history. And steel wires are holding it - looks so amazingly safe, now I want to ride it

 

You'd be amazed how many coasters use steel cables for support. Two right off the top of my head, Thunderbolt at Kennywood, and Manhattan Express in Las Vegas. And if you like to count it as a coaster, Superloops/Ring of Fire also uses cables.

 

I would NEVER ride them

Posted

Quite a few older wooden coasters use chain connected to a center post in turns. You would really miss out on a lot of good classics if you didn't ride because they use cables/chains.

 

I don't see the problem with cables anyway. If they are tension only members, a cable is the most efficient way to carry the load.

Posted

Not only do classic wooden coasters use them, but some modern ones do too. As well as some steel coasters.

 

I know that Python at BGA used cables to support the turn leading into the corkscrews.

Posted
Quite a few older wooden coasters use chain connected to a center post in turns. You would really miss out on a lot of good classics if you didn't ride because they use cables/chains.

 

I don't see the problem with cables anyway. If they are tension only members, a cable is the most efficient way to carry the load.

 

Yep, true that! I agree with you, I mean how else can you safely carry a load from a ride without rebuilding the structure? Give me proof and I'll think otherwise.

Posted

There is one of these going into DippieDoe Familiepark next year, so hopefully it will be like the X-car coasters that get better with the newer rides. The concept is good, but the ride is really short, and like has been said, it appears to be very rough.

Posted

I heard dippiedoe was building one of these, really strange since there never was anything special to do and it was a kids orientated park and now they're getting this, I've never been on one but seeing this go over the top makes me wonder if that can't result in injuries or something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

Terms of Use https://themeparkreview.com/forum/topic/116-terms-of-service-please-read/