deathbydinn Posted July 25, 2012 Share Posted July 25, 2012 What action are you trying to complete? Try using version 1.302:[attachment=0]8Cars Trainer 1.302.zip[/attachment] Still getting the same thing. Right now I'm just trying to add money to start a park, but I tried to do a few other things and nothing would work. Link to comment Share on other sites More sharing options...
imawesome1124 Posted July 25, 2012 Share Posted July 25, 2012 I opened up my new bench and I was going to try to remove some path, but when I did I got a message: "Can't remove this, land not owned by park" It was the same thing anywhere on the path or the boardwalk, I can't remove or build anything because it says I don't own that land. It's ONLY on the boardwalk, everywhere else on the map is fine. What do I do? Link to comment Share on other sites More sharing options...
GayCoasterGuy Posted July 26, 2012 Share Posted July 26, 2012 (I'm sure this has been asked too many times, so sorry in advance if it bugs anyone) Can you raise the speed of a block brake with the 8 cars per trainer or any other hack? Link to comment Share on other sites More sharing options...
simaticable Posted July 26, 2012 Share Posted July 26, 2012 No Link to comment Share on other sites More sharing options...
Ace Of Spades Posted July 26, 2012 Share Posted July 26, 2012 (I'm sure this has been asked too many times, so sorry in advance if it bugs anyone) Can you raise the speed of a block brake with the 8 cars per trainer or any other hack? While the above poster is correct, the speed a block slows the train to is dependent on the speed at which the train hits the block. If it happens to be going...28 or above if I remember correctly, the block only trims the speed down to 16 mph, as opposed to the agonizingly slow 4 mph you'll usually get. Link to comment Share on other sites More sharing options...
GayCoasterGuy Posted July 26, 2012 Share Posted July 26, 2012 (I'm sure this has been asked too many times, so sorry in advance if it bugs anyone) Can you raise the speed of a block brake with the 8 cars per trainer or any other hack? While the above poster is correct, the speed a block slows the train to is dependent on the speed at which the train hits the block. If it happens to be going...28 or above if I remember correctly, the block only trims the speed down to 16 mph, as opposed to the agonizingly slow 4 mph you'll usually get. But will it stop the train in the event of 2 trains entering the same block? I guess that's not too hard to find out for myself... Link to comment Share on other sites More sharing options...
Ace Of Spades Posted July 26, 2012 Share Posted July 26, 2012 (I'm sure this has been asked too many times, so sorry in advance if it bugs anyone) Can you raise the speed of a block brake with the 8 cars per trainer or any other hack? While the above poster is correct, the speed a block slows the train to is dependent on the speed at which the train hits the block. If it happens to be going...28 or above if I remember correctly, the block only trims the speed down to 16 mph, as opposed to the agonizingly slow 4 mph you'll usually get. But will it stop the train in the event of 2 trains entering the same block? I guess that's not too hard to find out for myself... Usually should. I've had a Giga running continuously for 60 in-game years with a 16mph midcourse block and it's never crashed. Link to comment Share on other sites More sharing options...
10ryansmith Posted July 27, 2012 Share Posted July 27, 2012 8cars is great... If W7 isn't involved. If so. Good luck. Lol. Also, anyone know how to fix this glitch? Its where someone (I have a terrible memory) made huts invisible on a scrambler but I deleted it for a tilt n hurl. Now I can't build anything where the huts are? Even with zero clearance on. It says "Object in way". Any know fix for that? Also Also, looking for someone to unsink and sink some huts for me. One last thing, is there a way to have the clear queue path over a regular path? When i zero clearne the clear path replaces the other... Any hints or tricks? That's, Joel. Link to comment Share on other sites More sharing options...
coasterfreak101 Posted July 27, 2012 Share Posted July 27, 2012 Also, anyone know how to fix this glitch? Its where someone (I have a terrible memory) made huts invisible on a scrambler but I deleted it for a tilt n hurl. Now I can't build anything where the huts are? Even with zero clearance on. It says "Object in way". Any know fix for that? Color that tile's land with something you haven't used anywhere else in the park, go to 8cars >> Map Object Manipulation and select "Remove" and "[that land type]" and whatever things you want to remove. That'll get rid of the object you made invisible with the original hack, and you'll be set. One last thing, is there a way to have the clear queue path over a regular path? When i zero clearne the clear path replaces the other... Any hints or tricks? You'll need to put down the path objects, then place the invisible path over it. There's no way to have two paths occupying the same tile at the same height, only a way to make the appearance that you're using one type of path when you're actually using the invisible one. Link to comment Share on other sites More sharing options...
A.J. Posted July 27, 2012 Share Posted July 27, 2012 8cars is great... If W7 isn't involved. If so. Good luck. Lol. 1.32 works fine on my Windows 7 Professional. I don't know what you're on about. Link to comment Share on other sites More sharing options...
10ryansmith Posted July 27, 2012 Share Posted July 27, 2012 ^^ Thanks. Ill try that. ^ I can't get merging to work and MOM only works half the time. The own all land doesnzt always work and the open and close park works intermittenly and I can't make anything invisible (huts and all). And I've done all that before I moved to W7. Everything else works fine. Ask Coupon, I've had all kinds of issues. Lol. I ask him to do a lot. Lol. Link to comment Share on other sites More sharing options...
Xtreme97 Posted July 27, 2012 Share Posted July 27, 2012 Colour the land, then go into MOM (version 1.32), check Remove > Null Items > *Land Type* > OK. Then use the ingame clear scenery option to remove the scenery on that tile. Link to comment Share on other sites More sharing options...
Twitch Posted July 29, 2012 Share Posted July 29, 2012 Is there a way to get an entertainer costume that I did not select the scenery group for for into a park file, specifically, the bandit from the wild west set? Link to comment Share on other sites More sharing options...
RCT2day Posted July 29, 2012 Share Posted July 29, 2012 ^Aren't all costumes for the entertainer always available? I've never seen any option of selecting/disusing different ones. Link to comment Share on other sites More sharing options...
Twitch Posted July 29, 2012 Share Posted July 29, 2012 They only appear to be available when their respective scenery is. EDIT: Derp, I shouldn't have posted before I checked 8cars. Link to comment Share on other sites More sharing options...
molemaster43 Posted July 29, 2012 Share Posted July 29, 2012 How do you reset all of your RCT2 scenarios? What I mean is, how do you make them "unbeaten?" Link to comment Share on other sites More sharing options...
Weeman Posted August 2, 2012 Share Posted August 2, 2012 I guess you can reinstall the game . Make sure you save your Projects in a separate folder so they will not be deleted. Link to comment Share on other sites More sharing options...
molemaster43 Posted August 2, 2012 Share Posted August 2, 2012 ^Tried it, did not work. Link to comment Share on other sites More sharing options...
RCT2day Posted August 12, 2012 Share Posted August 12, 2012 ^I'm not really sure how, but all my games scenarios were reset as if I never did them yet I still have the saved games. I don't think I did anything special to reset them. They just reset automatically. Sorry if that doesn't help. Is there an option in 8-cars to increase/decrease land height just like the -1 unit shovel tool in the scenario editor? Link to comment Share on other sites More sharing options...
Xtreme97 Posted August 12, 2012 Share Posted August 12, 2012 Yeah, click Landscpae, Adjust Land Mover size and set it to zero. Link to comment Share on other sites More sharing options...
Ace Of Spades Posted August 13, 2012 Share Posted August 13, 2012 Yeah, click Landscpae, Adjust Land Mover size and set it to zero. Isn't there also an option labeled "Enable Mountain Tool"? Or is that only in 1.21? Link to comment Share on other sites More sharing options...
Xtreme97 Posted August 13, 2012 Share Posted August 13, 2012 Oh yeah, forgot about that. It usually doesn't work for me though so I have to set it to zero. But yeah, mountain tool is quicker. Link to comment Share on other sites More sharing options...
DOCTOR DOOM!!! Posted September 1, 2012 Share Posted September 1, 2012 Has anyone created/edited a Windseeker/Starflyer for RCT2 and is there a download for the object??! Link to comment Share on other sites More sharing options...
phillegro Posted September 3, 2012 Share Posted September 3, 2012 (edited) Bit of help needed here. I have a park I'm making, started landscaping and adding a carpark ect in the scenario editor outside of the boundary. I got impatient, started building all the rides before I had completed the exterior. Now, I want to add tree's and so forth outside of the boundary... Using the Son of Beast trainer I managed to "own all land" which works fine, except that the guests can no longer get into the park.. they walk towards the entrance and at some random point cant go any further... I'm assuming this is a glitch with the trainer and theres no way around this... ? Does anyone know of any other way I can own all land? I seem to remember reading in this thread something about reversing the boundaries... EDIT: got it sorted - i used 8cars to invert the land ownership. ...only reason i didnt do this initially was because i couldnt get it to work! Edited September 3, 2012 by A.J. Link to comment Share on other sites More sharing options...
A.J. Posted September 3, 2012 Share Posted September 3, 2012 (edited) There really isn't a Star Flyer custom ride for RCT2, because of the game's limitations. Theoretically, you could do it with the Observation Tower by making a custom car for it, but I'm pretty sure it's realistically impossible. There have been some parks that make great fake Star Flyers using scenery and track. The park Six Flags Washington, made from one of our members in RCT2, has a pretty good one. Edited September 3, 2012 by A.J. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now