ZeroGravity55 Posted December 31, 2015 Posted December 31, 2015 (edited) I've had this on file for a while now. Decided to upload it. It's my first attempt at off-ride shots. I have to admit it was bit tougher than I thought. Hopefully I'll get better at it! Btw, I know the name is totally original Edited March 2, 2016 by ZeroGravity55
GCI Wooden Posted December 31, 2015 Posted December 31, 2015 I've had this on file for a while now. Decided to upload it. It's my first attempt at off-ride shots. I have to admit it was bit tougher than I thought. Hopefully I'll get better at it! Btw, I know the name is totally original https://www.youtube.com/watch?v=asNJjPySfNM The off-ride shots looked great, just try and get your cursor out of the video. I can relate to not being able to come up with names. I named one of my coasters "Soup" once because I couldn't come up with anything.
ZeroGravity55 Posted December 31, 2015 Posted December 31, 2015 (edited) I've had this on file for a while now. Decided to upload it. It's my first attempt at off-ride shots. I have to admit it was bit tougher than I thought. Hopefully I'll get better at it! Btw, I know the name is totally original The off-ride shots looked great, just try and get your cursor out of the video. I can relate to not being able to come up with names. I named one of my coasters "Soup" once because I couldn't come up with anything. There were a few shots my cursor was in and I didn't catch it until I was editing the video. Recording video is a bit of pain and takes forever on my laptop, so I decided to leave it as is. At least I didn't leave it in almost the whole video like I did on my Boss RMC video I was and still am a bit of a newb when it comes to this stuff As for the name, the literal filename I have for this coaster is called Barney. I almost uploaded it and put the Barney theme as the audio for it. Edited March 2, 2016 by ZeroGravity55
GCI Wooden Posted December 31, 2015 Posted December 31, 2015 As for the name, the literal file name I have for this coaster is call Barney. I almost uploaded it and put the Barney theme as the audio for it. That would have been awesome!
ZeroGravity55 Posted January 27, 2016 Posted January 27, 2016 Lightning Rod has had me thinking of several ways you could launch a coaster up a mountain side and this one idea I've came up with.
ZeroGravity55 Posted February 18, 2016 Posted February 18, 2016 From a terrain and layout standpoint, this is my attempt at a steel Voyage.
drummermattk Posted May 16, 2016 Posted May 16, 2016 (edited) Currently working on a park with a nice GCI woodie, Rocket Coaster (Heavily Inspired by Cheetah Hunt) and a Nice B&M Dive Coaster. Supporting is finished for Warpig (GCI woodie) and Stallion (Intamin Rocket Coaster) and currently supporting Mustang (Dive Coaster) If some supports look like they where edited prefabs......................Its because they are, I am terrible at custom supports. Ignore the Mack Launched coaster in the back, That was scrapped. Edited May 25, 2016 by A.J.
TB305 Posted June 16, 2016 Posted June 16, 2016 Trailer for my upcoming RMC wooden coaster [youtu_be]http://youtu.be/nsIGRaaamTE[/youtu_be]
Rill'o'beily Posted June 16, 2016 Posted June 16, 2016 Trailer for my upcoming RMC wooden coaster Ooooh is that a vertical lift hill
Rill'o'beily Posted June 17, 2016 Posted June 17, 2016 ^No, sorry to disappoint I wouldn't be surprised since an RMC can be pretty much whatever you want
TB305 Posted July 2, 2016 Posted July 2, 2016 [youtu_be] [/youtu_be] After a month and a half of hard work, here's Gunslinger - a 120 foot RMC wooden coaster featuring a variety of inversions, hills, and twists which provide ample airtime and positive G forces.
DougMJr Posted September 21, 2016 Posted September 21, 2016 Decided that I may get back into NoLimits during the off-season. I started working on what would probably be a physically and financially prohibitive 700ft. tall, 150mph Intamin Accelerator coaster. [youtu_be] [/youtu_be] It took a few hours just to get the level of detail I wanted for the supports for the top part of the tower... so this is going to take a while to finish supporting and theme. Especially since I don't have a lot of free time.
DoinItForTheFame Posted September 23, 2016 Posted September 23, 2016 [youtu_be] [/youtu_be] After a month and a half of hard work, here's Gunslinger - a 120 foot RMC wooden coaster featuring a variety of inversions, hills, and twists which provide ample airtime and positive G forces. Not going to lie, probably one of the best RMC no limits coasters I've seen! Great job!
Projektion Posted September 27, 2016 Posted September 27, 2016 After spending most of the summer away from NL2 due to work, I recently begun work on an early-2000's Intamin Mega coaster (ala Bizarro/Goliath) Overview of the layout Lift supports Airtime hill supports and a view of the far end of the layout
gk2b Posted October 6, 2016 Posted October 6, 2016 Something im working on, inspired by The Smiler. It still needs smoothing and more supports. [youtu_be] [/youtu_be]
DougMJr Posted November 11, 2016 Posted November 11, 2016 The 700 ft. tall 150 mph ultra-strata coaster is slowly but surely coming along. Smooth as butter, but I still need to finish supports and theming.
Projektion Posted November 18, 2016 Posted November 18, 2016 Well, it's not what NL2 was intended for, but I've been working on this
ZeroGravity55 Posted February 1, 2017 Posted February 1, 2017 Bet you can guess which two coasters I'll be taking a trip to ride this summer!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now