Jump to content
  TPR Home | Parks | Twitter | Facebook | YouTube | Instagram 

Recommended Posts

  • Replies 26
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted

I haven't downloaded it yet, but from the picture I can see two things that are wrong. The color is too dark and red, and you should be using the stair step supports.

Posted

Ok.

The real Raven's length is 2371' long, Your's is 2027'.

Height is 80' your's is 72'.

Your only remotely close to the speed wich is 48 mph and yours is 45 mph.

Other then that, its a Ok recreation.

Posted

It's decent. There are some red G spikes. Ride in the front seat and the back seat. There's a red negative G-force in the second hill, and there are some red lateral G's in the turns after the fifth drop.

 

The turn over the lake is too banked. The last big turn to the right is a little too banked, and it's shaped funny. The read turn swoops downhill a bit.

 

There are tires in the station and brake run when there shouldn't be. It should all be gravity. The final brake run is a little short.

 

The color is still off a little. It should be lighter. This looks like the wood was stained. The terrain was only barely tinkered with too. The ravine the first drop is in is deeper.

 

Work on it a bit more. Watch the G-force spikes in the red.

Posted

^Yeah, I just tested it in the front seat...

 

I tried to work on the color, but it wouldn't work out right. Oh, and I tried to make the ravine, but if I took it down very much, it would fill with water, and if I disabled the water, I couldn't make the lake turn...

 

Any tips on terrain?

Posted

Build the coaster higher. Instead of making the station 10 feet off the ground, make it 30 feet. Build the terrain around that.

 

To get the right color, you'll have to customize the colors. When choosing the color, click on "Define Custom Colors," and choose there.

Posted

You still have red G spikes. Watch it in 25 percent speed. I only looked in the front row. And just making the tires disappear in the station doesn't make it right. Angle the station downward. Gravity needs to get that train out of the station, not tires.

 

The same goes for those brakes in the brake run. Gravity. Not invisible tires.

 

The color's a bit better. Be sure to use those custom colors more often. They're great.

 

Look at these screenshots, and pay attention to the G-forces. You've got to work on those. More banking, wider turns, etc.

raven3.jpg.82e7d9c58369bff98522f68997d7165c.jpg

Eight. EIGHT G's entering the brake run. We're dead. Or at least going to the hospital with broken necks.

raven1.jpg.8084482769db4e641600a6d078897caf.jpg

3.4 lateral G's? My body!

raven2.jpg.8b93b23a26a5f5a6a71db9976d64a0cc.jpg

Look at the negative vertical G's. Ouch!

Posted

How are you getting those g ratings? Like I said, I rode it in EVERY seat, and didn't get one red g.... help?

Posted

I'm running the most recent NoLimits. Try running it in 25 percent speed. If you don't get them, maybe my computer hates me. That wouldn't be the first time.

Posted
Yeah Im not getting them either. re you runnin V.17?

 

I am running V.17 and I got the G-Spikes.

 

Also there are two places where tree's hit the track. Put tunnels on all of your track and "Walk through it" don't ride and you will see what I am talking about. Plus if you put on the tunnel you will notice that right before the lift the tunnels collide. Other than those few things it was pretty good!

~Matthew

Posted
How are you getting those g ratings? Like I said, I rode it in EVERY seat, and didn't get one red g.... help?

 

He was running it at 25% speed. Which gives the most accurate G ratings.

Posted

I'm running 1.7 too, and the highest I got was dark yellow. But like I said, I don't know how to run it in 25% speed... (the - didn't work...)

Posted
I'm running 1.7 too, and the highest I got was dark yellow. But like I said, I don't know how to run it in 25% speed... (the - didn't work...)

 

Is it the minus sign on the Number Pad? (That is the one I use) If that doesn't work, try turning NUMPAD on. (I don't know if it makes a difference)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

Terms of Use https://themeparkreview.com/forum/topic/116-terms-of-service-please-read/