dmaxsba2408 Posted September 8, 2010 Posted September 8, 2010 Dmaxsba2408....I can't load the cp park because it is missing met rt wai couldent get the rest of the missing object. MetRtwai is a custom made paddle boat ride. It is in the ZIP file right below the park download. You need to place all the DAT's that are in the ZIP in your RCT2 ObjData folder by hand. Make sure you take them out of the folder that is in the ZIP before you place them in your ObjDAta folder. RCT2 does not allow the use of sub folders. The path is... My Computer... Local Disk(?)... (whatever the drive is RCT2 is installed on) Program Files... Infograms Interactive... (If using the Triple Thrill Pack it will be Atari) RCT2... ObjData Once placed you need to start your game and let the game go through it "CHECKING" cycle. If it "ERROR TRAPS" hit OK and load it again, it happens sometimes, don't worry about it. Once the rides are loaded the park will load the rest of the objects on it's own. I would love to help djbrcace1234 get the items your wanting in a park so they will export to you but like him I have to many items in the ObjData folder and I can't select things. If he can't get them into a park use the same manual method above for the files he gives you.
Rezar Posted September 8, 2010 Posted September 8, 2010 Dmaxsba2408....I can't load the cp park because it is missing met rt wai couldent get the rest of the missing object. MetRtwai is a custom made paddle boat ride. It is in the ZIP file right below the park download. You need to place all the DAT's that are in the ZIP in your RCT2 ObjData folder by hand. Make sure you take them out of the folder that is in the ZIP before you place them in your ObjDAta folder. RCT2 does not allow the use of sub folders. The path is... My Computer... Local Disk(?)... (whatever the drive is RCT2 is installed on) Program Files... Infograms Interactive... (If using the Triple Thrill Pack it will be Atari) RCT2... ObjData Once placed you need to start your game and let the game go through it "CHECKING" cycle. If it "ERROR TRAPS" hit OK and load it again, it happens sometimes, don't worry about it. Once the rides are loaded the park will load the rest of the objects on it's own. I would love to help djbrcace1234 get the items your wanting in a park so they will export to you but like him I have to many items in the ObjData folder and I can't select things. If he can't get them into a park use the same manual method above for the files he gives you. I actually have the same thing where I can't select objects either. Those parks you guys have fixed work. I'm pretty sure someone updated the Six Flags Magic Mountain recreation because I remember having that recreation and it had Flashback and Psyclone and it didn't have Tatsu.
djbrcace1234 Posted September 8, 2010 Posted September 8, 2010 ThrillRider: Okay, so to make things easier for me, I found Ja227's Sixflags Over Georgia Recreation. If you don't know who this guy is, he is the one that made a bundle of Six Flags items, and he is also the creator of the 8 cars program. I'll delete the stuff on the map for you, and I will also include the custom rides you asked for. One question though, How big of a map do you want?
thrillrider Posted September 8, 2010 Posted September 8, 2010 Once again, thank you very much. As far as map size goes, 180x180 should be good...not too small, but not crazy huge either.
djbrcace1234 Posted September 8, 2010 Posted September 8, 2010 Okay, so I have it all set up. I could not find the Butterbeer type ride, nor a trokia-(Those I don't think are in the game.) I have added numerous other rides that I think would help out. But here. I hope this helps... Sixflagsbench.zip Exported rides.zip .... And works Edit: The Peep table is in the ? section of the scenery tab. I only found one good one, but no, Peeps can not sit on it, but there are "peeps" that sit on it.
thrillrider Posted September 8, 2010 Posted September 8, 2010 Ugg... It says that it's missing RIDETESJ/00
djbrcace1234 Posted September 8, 2010 Posted September 8, 2010 RIDETESJ.DAT Just keep trying. If I keep missing things, I'll find them for you.
thrillrider Posted September 8, 2010 Posted September 8, 2010 Yea, I am having all kinds of problems with this....lol Anyway you can send that file as a zip? For some reason my computer thinks it's an audio file. Thank's man.
thrillrider Posted September 8, 2010 Posted September 8, 2010 Still not working... Still can't open the dat file. The restricted area file is also missing 9mka
Dotrobot Posted September 8, 2010 Posted September 8, 2010 I have a butterbeer ride. I'll post it as soon as i can.
thrillrider Posted September 9, 2010 Posted September 9, 2010 I got the butterbeer ride. I seem to be having issues opening up the last park posted. Keep getting "missing object data".
dmaxsba2408 Posted September 9, 2010 Posted September 9, 2010 ^ Go HERE and download the ParkDat utility for RCT2. It's about the 7th post down. The instructions for it and a big picture of what all the number will mean when you open a park are all posted. Use it to open the park and see what your ObjData folder is missing. Make of note of them and post them here and someone will be along to get them for you. If it's more than 10 please don't waste your time typing them all out just say so and I will download the park and try to figure out why the park did not export properly so we can get these issues worked out and you can get started building your park. > dmax is looking forward to seeing it...
djbrcace1234 Posted September 9, 2010 Posted September 9, 2010 My bigger mistake was most likley putting in too many custom rides. I must have missed them while trying to look for them. Never good with finding exported rides. >_
thrillrider Posted September 9, 2010 Posted September 9, 2010 I may have all the custom rides now. What custom rides did you put in the park? If I can narrow it dow to what ride it is, that that would make things a little easier. Thank you.
dmaxsba2408 Posted September 10, 2010 Posted September 10, 2010 Here are the 6 rides that were missing from the ZIP(s) for the Six Flags Bench. If these do not get the park to open please get the ParkDat as mentioned above and see what else is missing. 's.zip I still need the following DAT's if anyone has them... 8 10 11
thrillrider Posted September 10, 2010 Posted September 10, 2010 I tried that program, and it worked for a few problem games, but when I try to load that six flags bench the program crashes.
dmaxsba2408 Posted September 10, 2010 Posted September 10, 2010 Weird, I used the ParkDat to see what custom rides were in the park so I could make a list and see what was left out. Didn't have any problems. Anyway now that you have all the custom rides the park should load without any more issues. I just tried it myself and I was also missing several of the scenery items that came with it. They all loaded in automatically just as they should and the park opened without any issues.
Dotrobot Posted September 10, 2010 Posted September 10, 2010 Idk If this was posted before. But I want the SOB trainer. Not neccesarily need it, but it might come in handy!
SPEEDIE Posted September 12, 2010 Posted September 12, 2010 i'm looking for rcfsup2.dat i'm trying to open some six flags over Georgia recreation i got with a few other recreations
dmaxsba2408 Posted September 12, 2010 Posted September 12, 2010 Here is your DAT. With this being such a common object it makes me think this park has not been exported. If you still can't get the park to open please attach the park to your next post and I (or someone) will download it and see what's going on and then post it again fixed for you. Attach the others also if you can't get them to open either. May be the same issue. RCFSUP2.DAT
thrillrider Posted September 12, 2010 Posted September 12, 2010 Is there a limit on how much scenery you can add to the game? I may have added too much, as when I go into the scenario park of the game, I can't scroll down my scenery in one of my tabs. If this is the case, how do I fix it?
dmaxsba2408 Posted September 12, 2010 Posted September 12, 2010 Yes there is a limit, not sure what the number is but if the scroll bar is not moving you are past it. As for getting it to work again you just need to start taking things out. I am going to assume it is the small scenery items that is locked up since that is the usual one. If you have the DataChecker you can use it to figure out what items are what and then decide what to remove. If you don't have it you can download it on page 49 in the RCT2 help topic, it us under the ParkDat download.
thrillrider Posted September 13, 2010 Posted September 13, 2010 That fixed the problem. Thank you dmaxsba2408
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now