GeForceRider93 Posted April 10, 2011 Share Posted April 10, 2011 (edited) Hello, my name is Christian, I´m from Germany and this is my first post at TPR. I would like to present some screenshots of my long term project. It its a recreation of Holiday Park´s Expedition GeForce. At the moment I´m working on details for the lifthill such as the catwalk, the lamp post at the top, the track for the cable-car and so on. Here some screenshots of the train, lifthill, supports and details. I hope you´re able to understand my english ,Chris the train with cartexture cable-car track close up one of the completed supports the lamp post overview Edited April 10, 2011 by GeForceRider93 Link to comment Share on other sites More sharing options...
Pacificoaster Posted April 10, 2011 Share Posted April 10, 2011 I believe the correct acronym for the site would be TPR. Other than that, your english is great and so is your recreation so far. Good work with the 3d modeling. Link to comment Share on other sites More sharing options...
GeForceRider93 Posted April 10, 2011 Author Share Posted April 10, 2011 Oh thanks I corrected it. I´m not going to repeat this mistake! And thanks for your comment. ,Chris Link to comment Share on other sites More sharing options...
Yamez Posted April 10, 2011 Share Posted April 10, 2011 It looks really good! Keep it up! Link to comment Share on other sites More sharing options...
mightbeawannabe Posted April 10, 2011 Share Posted April 10, 2011 Excellent thus far! The best looking and most promising recreation of it yet! Link to comment Share on other sites More sharing options...
Vekoma Fan Boy Posted April 10, 2011 Share Posted April 10, 2011 Willkommen in TPR! What you have looks really nice! I really like the supports. Are they all 3DS or just the footers, flanges and other things? Also, how much of the trackwork do you have done? What's there looks really nice! Und! (Ich habe dies zu einander member schon gesagt.) Mach dir kein sorgen um dein English. Es ist warscheinlich viel besser als meine Deutsch! Link to comment Share on other sites More sharing options...
GeForceRider93 Posted April 11, 2011 Author Share Posted April 11, 2011 At first thaknks to everyone who commented. ^Only the details like footers, flanges and so on are .3ds. The supports were made and going to be made with the NL editor. Now to the layout. I´ve done about 5/6. So I´m working on the third turnaround after the "right to left flip" and the four following bunny hops. I also finished the straight part of the track for the cable-car. Now it´s time for some screenshos! ,Chris Ps. Your sentence is nearly correct, good job! the "Freefall Tower Shot" the lifthill and the new part of the catch-car track a shot you can only get in NL( if you don´t have an helicopter) the two turnarounds. I´m working hard on shaping them right Link to comment Share on other sites More sharing options...
mightbeawannabe Posted April 11, 2011 Share Posted April 11, 2011 Is it handbuilt or toolbuilt? (In the editor or with an outside program) Link to comment Share on other sites More sharing options...
Jcoasters Posted April 12, 2011 Share Posted April 12, 2011 That looks absolutely amazing Link to comment Share on other sites More sharing options...
GeForceRider93 Posted April 12, 2011 Author Share Posted April 12, 2011 ^^ All the track you can see is built by hand! I only used ctrl+g to smooth the track. Maybe I'm going to use Newton for the four bunnyhills because they are really hard to built by hand (the smoothness is the problem). ,Chris Link to comment Share on other sites More sharing options...
freefallXL Posted April 13, 2011 Share Posted April 13, 2011 Awesome project Christian It´s nice, you found the way.. to TPR I´m looking forward to your long term project. If it is ready, i´m sure it will *rocking* the exchange-section Link to comment Share on other sites More sharing options...
Team Thriller Posted April 13, 2011 Share Posted April 13, 2011 Ich liebe es!! The only thing that looks kinda off is the third hill, as I believe it should be a little more steeper and not as flat. But I could be wrong... Ich glaube es sieht sehr gut aus! --James Link to comment Share on other sites More sharing options...
B.A.B Posted April 14, 2011 Share Posted April 14, 2011 I really like,I hope your next No Limits coaster will be an Arrow DYnamics or Vekoma. Link to comment Share on other sites More sharing options...
GeForceRider93 Posted April 17, 2011 Author Share Posted April 17, 2011 Thank´s to everyone who answered since my last update. ^^In my opinion the third hill ist really well shaped, because all over it´s crest are -1g. ^I´ll see what I can do, but first I´m going to finish this project. Now to the update. The track for the catch-car is nearly complete. There is only the vertical part and the downbend to it left. After that I´m going to add more supports,flanges and footers. Then I´ll make the station. And finally some new screenshots! By the way all .3ds were made with the free version of the object creator. Train climbing up the lifthill the train is close to one of the best first drop´s in the world and here we go! all the good thinks come from above best shot of the update (in my opinion) I fnish this update with some motion blur! Link to comment Share on other sites More sharing options...
freefallXL Posted April 22, 2011 Share Posted April 22, 2011 Really nice update! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now