Steffen_Dk Posted March 31, 2009 Share Posted March 31, 2009 I finally got my NL to work after several months of troubles That also means that I've lost almost every feeling with the program and almost have to start all over again So I decided to give it a go with a Eurofighter - have never made one of these before. As I can to the lift the, in my opinion weirdest thing happened, but I solved it. It did however, show up again in the first drop section - well here's a picture of it - I think that describes it better than I do. What is going on here? Link to comment Share on other sites More sharing options...
bravo Posted March 31, 2009 Share Posted March 31, 2009 I think it is because the last section before the drop ends just in 90º, so if you move the angle a little it could be better. Link to comment Share on other sites More sharing options...
dr.gumbo Posted March 31, 2009 Share Posted March 31, 2009 NL doesn't like vertical sections, that's why its best to avoid having any vertices at a 90 degree angle. Also, the top of the lift looks badly shaped. Try and get a circular 3d to get the shape right. It helps a tonne when trying to do something like you are now. Link to comment Share on other sites More sharing options...
nemesiscrazy Posted March 31, 2009 Share Posted March 31, 2009 Hey I am new to the forum. I can see you are having a problem with the beyond vertical drop on your Eurofighter. If you select the the top node on the section that has gone funny and select Rel Roll (relative roll) while the node is still white. This should sort out your problem. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 2, 2009 Author Share Posted April 2, 2009 Yeah - I solved the problem, but a new one as arrived. I've tried to make a Zero-G-roll using a TUT - that works fine. But as soon as I use the AHG on it, the output just becomes one straight piece of track instead of a heartlined roll - what am I doing wrong? I have coloured the element I want to heartline black as the TUT says. Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 2, 2009 Share Posted April 2, 2009 What's TUT (I'm not good with abbreviations). Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 2, 2009 Author Share Posted April 2, 2009 Tutorial Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 2, 2009 Share Posted April 2, 2009 ^ Try and put up a picture (before heartlining), I need better visualisation to help you solve the problem. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 3, 2009 Author Share Posted April 3, 2009 It look exactly like the one in the tutorial: Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 3, 2009 Share Posted April 3, 2009 ^ What speed do you have the AHG at? Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 3, 2009 Author Share Posted April 3, 2009 Segments=8 Heartline=1.1 SpeedIn=8.9 SpeedOut=4.2 Precision=6 Filter=50 Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 3, 2009 Share Posted April 3, 2009 I'm not really sure what's wrong but try and increase the input speed a bit and bring the output speed a little closer to the input one and see if it works then. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 6, 2009 Author Share Posted April 6, 2009 Hmmmm... No difference at all. Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 6, 2009 Share Posted April 6, 2009 Could you send me both of the files (before and after) so I can have a proper look at them? (Just send them via PM) Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 6, 2009 Author Share Posted April 6, 2009 ^Never mind - I solved it Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 6, 2009 Share Posted April 6, 2009 ^ Okay then. lol Link to comment Share on other sites More sharing options...
Eric_Smith Posted April 6, 2009 Share Posted April 6, 2009 ^Never mind - I solved it Do you mind me asking what you did to fix it? Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 7, 2009 Author Share Posted April 7, 2009 I raised the element by one meter. And then one of the segments weren't black-coloured. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 7, 2009 Author Share Posted April 7, 2009 Small update again, and perhaps a little help from someone? I ran into a little problem again - this time concerning the vertical loop - the exit of it is somewhat skewed. Pictures explain it better than words: How do I plain it out so to say? Other pictures - just to get a idea of what I've been doing so far: My fist attempt making a car texture - I think it turned out pretty well Link to comment Share on other sites More sharing options...
Loefet Posted April 7, 2009 Share Posted April 7, 2009 ^ The shape of the Immelmann looks far worse then the loop in my opinion. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 7, 2009 Author Share Posted April 7, 2009 I know that - I'm still working on that part Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 7, 2009 Share Posted April 7, 2009 Did you use elementary for the loop, because usually you have to send it through the AHG to get the banking right. Also, awesome job on the car texture. Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 7, 2009 Author Share Posted April 7, 2009 Yes I have tried, but it just ruins the loop totally. Link to comment Share on other sites More sharing options...
dr.gumbo Posted April 7, 2009 Share Posted April 7, 2009 Have you got all the track in the loop white and the correct speed settings? Link to comment Share on other sites More sharing options...
Steffen_Dk Posted April 7, 2009 Author Share Posted April 7, 2009 yup. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now