supermanrosfan0810 Posted February 17, 2007 Posted February 17, 2007 I Did a recreation of Dragster and some other CP coasters in rct3. I know everything's out of place, I was just building the rides! Tell me what you think! TTD tower as well as Power Tower and parts of Magnum XL 200 and Iron Dragon. the black and orange coaster in the top left is a random custom looper. TTD launch and transfer tracks. Looking up at Dragster's Tower with Magnum on the right and in the backround. My best shot at ttd's station. Wicked Twister, maXair and Magnum. I couldn't figure out how to build Wicked Twister's supports! Magnum and Blue Streak. Iron Dragon, Dragster and my custom ride, Vortex. TTD's Launch track pov Some opinions/constructive criticisms would be nice!
supermanrosfan0810 Posted February 17, 2007 Author Posted February 17, 2007 Can I get some feedback? What can I improve, what did you like, etc.
chmilo24 Posted February 17, 2007 Posted February 17, 2007 I like it, it seemed like you took your time to get most of the details. How long did it take to build all of this?
Steffen_Dk Posted February 17, 2007 Posted February 17, 2007 It looks good. But I think you should try to make the paths wider.
BuffaloCoastin Posted February 17, 2007 Posted February 17, 2007 Looks pretty accurate to me. Try your hand at MF or Raptor? You might eventually be able to do an actual CP recreation if you had the time. //Adam
supermanrosfan0810 Posted February 17, 2007 Author Posted February 17, 2007 I Tried MF, But there's not enough room with the dimensions of what rides there are now. I'll probably do Raptor Next though. It took about two days to get TTD right because of how complicated it is. the others all took about a day, if not less. I might get to finishing Magnum's supports sometime too! (those will take ages!)
ConleyKE Posted February 18, 2007 Posted February 18, 2007 Really nice! I love the supports you did for TTD, very accurate. Two minor suggestions: first, the final bunny hops at the end of magnum should probably be alttile lower and more numerous. I tried to find a pic, but anyways there are like 4 bunny hills on the final stretch and they are very choppy, almost like a zig-zag. I think it might be better if you use the 45degree/medium slope for those hills, and make a few more before the tunnel and brake run (which by the way looks awesome). Secondly, I would do the same for Blue Streak's returning bunny hills. They are not very high, and should also be right up next to the "out" part of the out-and-back track. Hope that makes sense. Again, great job!
10ryansmith Posted February 18, 2007 Posted February 18, 2007 I liked the recreations, and I think that you should try Gemini or Wildcat after you do Raptor. Also, is there going to be a download?
supermanrosfan0810 Posted February 18, 2007 Author Posted February 18, 2007 I'll try fixing magnum. The thing is it has a lot of speed going into that last stretch, so I might have to throw in some trims. also all of the bunny hills might not fit into the space I have (which is what happened with blue streak! ) Also, I'll Do a download if someone can tell me how to do that!
supermanrosfan0810 Posted February 18, 2007 Author Posted February 18, 2007 Well I did Raptor, but haven't put it in the park yet. I tried Wildcat, But it loses momentum to quickly so I couldn't. But Raptor worked fine! I had to take the last corkscrew out unfortunatley, so it would complete the course Here's the shots:
10ryansmith Posted February 20, 2007 Posted February 20, 2007 Liked the recreation of Raptor, going back to my other post, I really think that you should try Gemini or even Mean Streak, , alus, I am just suggesting.
supermanrosfan0810 Posted February 20, 2007 Author Posted February 20, 2007 What coaster type should I use to make Gemini? That would be a tougie with the long and slow 180* turns, It might have the same problem as wildcat.
kennywood!007 Posted February 20, 2007 Posted February 20, 2007 I like the recreations. For Gemini theres some hack or something where you can intersect a wooden and looping coaster to make it look like Gemini. I don't know so sorry...
10ryansmith Posted February 22, 2007 Posted February 22, 2007 For the coaster type you could use the runaway mine train track and load the coaster cars. I know that there is a download off the internet and I will try to get it to download onto my computer then I can load it to this website.
supermanrosfan0810 Posted June 5, 2007 Author Posted June 5, 2007 Sorry for the Monstrous bump, but i've forgotten to update my park here! here's my more recent projects in the park! More accurate TTD Launch Track Mantis before repaiars Random cool power tower shot Recently rumors about vortex's demise have been circulating around the park... And they were true! Removed for future expansion The new and improved Mantis 2nd half Brake run, transfers and relocated space spiral Shortened magnum 3rd hill, although it will never be perfect with it's real-life shape vortex's replacement is Mean Streak! Different angle. Aerial shot. new 2nd half of Raptor. since its real station forms about a 45 degree angle with the lift, It's easier to leave it the way it was, since stations can't be at that angle in RCT. New Iron Dragon finale. looks more pretzel-ish to me! new Magnum turnaround that I like MUCH better. Added scrambler and a magnum first drop POV to make things interesting! thanks for reading!
supermanrosfan0810 Posted June 6, 2007 Author Posted June 6, 2007 ^Not sure. It'll be my next project if I do though.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now