gcifan

As I was reading down through the webpage. I read that Jeff Pike of Skyline Attractions gave his former mentor Mike Boodley his Kidney during a transplant in 2013. Wow!! that just is awesome that he was able to give the gift of life to a Friend and Mentor of his!!!! I am speechless. This the quote Source: www.goldenticketawards.com/#

My guess, is for Dorney park in 09 or 2010. a small coaster that will make user of the laser site or some other spot in the park, since it is a long coaster and low to the ground. and L shaped. That is my guess. only becuase cedar fair seems to be working GCI alot.

I dont mean to sound like a pessimist, just because a track bender happens to show up on site with a lot of wood, doesnt' mean that GCI , could not be doing alot of track work and structural support work for timber wolf as well, instead of building a new coaster. I am just throwing that into the mix. I am just speculating. But now that i think about it, with the web campaign , I dont think they would be making big deal about a haunted house for a scarefest or what have you, so maybe it is possible they are getting a GCI woodie, well have to see, what happens.

I think this coasters looks very creative, but i have to say it does resemble a knex coaster called renegade run a little bit. http://www.knex.com/building_toys/renegade_run_coaster.php I think it will be very intersting to see what the reviews on this, becuase the inversions on this look intense with all of the hang time and quick transistions i see, especially the part of the ride where train rolls to the outside while making a curve to the left. I have to say the paint job on teh trains look great. have a great day all,

I read about the article on comcast.net under there fan videos, which can only be access if you have a comcast.net account. Anyway , from what i heard the train releaased and as it hit the station and since there was a hydraulic leak that was spraying onto rider below the brakes were closed and the riders came off one of the hills to a dead stop in the station brakes, causing a quick stop. They did not specify whether it was the lift hill out of the station or the second hill comming back into the station back wards, but they did say that riders were sitting on one of the hills for 2 and half hours before dropping and then hitting the brakes hard and two were in serious injuries had to be taken to the hosopital. This is on comcast.net -> click on link below and then find the link for six flags america. http://www.comcast.net/providers/fan/popup.html?v=546732603&pl=546330025.xml&launchpoint=Cover&cid=fancover&attr=home_teaser&viewmode=ClassicMode&cvqh=home_britneyLeak&config=%2Fconfig%2Fcommon%2Ffan%2Fhome%2Exml

Thank you for you help, I was able to figure it out, IT was rct 3 the original was giving me the issues. Once I installed the soaked expansion pack. I was able to make adjustments i needed. Thank you for your help GCI Fan

Hello everyone, I have had rct 3 for a since it came out and I am famillar with settings but, I had to reinstall my pc and rct3. After the setup of rct I accidently chose graphic settings of extreme, when I should have selected very good. I read through the manual and it says there is a reset to default option on the graphic setting options. I unable to find this. Does this exist? Also I uninstalled the program and rebooted pc and then reinstalled the program. To see if that would give me the option to allow me to select the correct settings such as very good and then have more resolutions to choose from. This did not work. So i had to manually adjust them all. Is there a way i can get the program to ask me this question again. Because a uninstall and install did not work. Any advice or help you could give I would appreciate this. I did try to seasrch for topics on this under graphics or settings and I was having difficult time with this. Thank you, GCI Fan

I noticed on the some of the supports in the pictures looked like they were already mounted to the pedistool and bolted down securley already. I noticed that it looks like they are putting a wooden frame around it to possibly put another pour of conecrete over the existing bolts. Am I possibly wrong about this, because that what it looks like. Does anyone have any idea as to why they would do this espcially if they need torque the bolts again down the road. A good example would be pcitures 6 and 7 there are other pictures furter down the page that show the wooden boxes around the peditsools, that have alraedy been poured. : http://freizeitparkweb.de/cgi-bin/dcf/dcboard.cgi?az=show_thread&forum=DCForumID1&om=2799&viewmode=all