How to Measure how toll,long and speed on NL

[coasterJunkie94]

Trying to make an Accurate recreation of Cyclone at lakeside

[Vekoma Fan Boy]

To measure how long you have to go in the editor, go to Coaster, statistincs and it will tell you at the top. To measure hoe tall, there is no set way on how to do this, if oyu want total elevation difference, you select the tallest node, read the height, and the select the lowest node, read the height, and find the difference. If you want height of the lift, again, highest and lowest nodes, highest being at the top and lowest being at the bottom of the lift. And for speed, you have to ride it in the editor, and record the highest speed.

[hix]

I always thought that the big white dots indicated 10m intervals. Is this correct?

[Eric_Smith]

^I belive that it is 5m not 10.

[IwantRevenge]

or you can set your mouse to the highest ponit no the ride then look in the cursor coodidinates. When looking form any angle except top, and 3d. The Y axis should tell you the exact height.

[Vekoma Fan Boy]

I always thought that the big white dots indicated 10m intervals. Is this correct?

 

the white dots represent 1 meter intervals. But that can be changed. And that simply isn't enough to get an accurate height readout.

[coasterJunkie94]

Thanks All!

Helped Alot