
Rollercoasters4Life
Members-
Posts
41 -
Joined
-
Last visited
Everything posted by Rollercoasters4Life
-
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Just uploaded this for you guys, it involves all of The Smiler footage that was in the Blue Peter show with all the other Blue Peter stuff cut out! It shows construction at several periods and also onride/offride shots of the ride with Face recognition science near the end: [youtu_be] [/youtu_be] -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Well depending on where in London you are stopping the park is roughly 3 hours drive away. If you were going by train you would probably have to get a train from a London station (say Euston) that goes to Crewe but get off at the Stoke-On-Trent stop and then get a bus to the park. The train can take anywhere between 1 hour 20 minutes to 2 hours 30 minutes depending on which train you get on and the time of day. Whether you can do the park in one day is all down to what time of year you go. Obviously in the summer months the park gets busy as well as events such as Easter/Halloween/Fireworks, ect. What time of year are you looking to go, mate? Also as a last resort if you wanted to visit a Merlin park while you stop off in London but don't want to make the trip to Alton Towers then there is Thorpe Park & Chessington World of Adventures down London way. Thorpe Park & Chessington are about 40 minutes from central London and offer a varying difference in attractions (Chessington more family based & for little children, whereas Thorpe Park is more about all out thrills). -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Rough? Looks pretty smooth for a ride with 14 inversions all taken at high speeds. The only part that looks a bit to snappy would be the exit to the Cobra Roll. The last two inversions imparticular look glass smooth! The true test of time will be if it can stay like that or if it will get unbearably rough. Can't wait to ride on the 23rd! -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
^^ "SMILE CHOCCY CHOCCY!" was used before The Smiler came about by that cereal, called Krave. So don't think they are making up special phrases to accompany the ride - just yet anyway... -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Updated map (Correct as of 18:45PM on 22nd April 2013): As you can see, the only red section left is just the last half of the first lift hill. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Ride close is 5PM and park stays open for around another hour. Latest he was probably there was 6 or before so they were still working on it at that time. We will find out the status of said track tomorrow once the park opens. Chances are they will have it in place. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
No, they are a full inverted drop. Basically a 360 twist into a drop. Sort of like a Zero-G roll but without such a big incline and not inline. Here is a picture of one of the inverted drops: (Thank to TowersStreet Facebook Page) As you can see it is missing just one piece of track to make it a completed inverted drop. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
There apparently is some media event on the 17th May and people are thinking it will open the next day on Saturday 18th May. Gives them a month to get it complete done. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Incoming thoughts are that the reason they are removing The Smiler coverings are because they need to move the fence back to get the final Marmaliser leg in - The Hypnotiser. It would obviously need the crane on the public side of the fence so it will be done after closing if it was to happen. It could also be because they want to put up the actual black fencing on this side of the site. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
First lift hill going in. Next piece is apparently imminent. (Thanks to JMGPannal from TowersStreet Forum) -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Even the map keys don't make sense with this thing. By looking at it, they either have 90% of it uninstalled, or 99% of it installed, with one piece left.....or something. Hell, I give up. Anything with a red outline is not been constructed yet - So both inverted drops and the first lift hill need doing. Every other bit of track is built and the rest is colour coded so you know what sections are what. There is still one Marmaliser leg left to be constructed, The Hypnotiser leg. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Overview map: Map is correct as of 8:30AM on 17th April 2013 -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
That sounds delicious. I have no idea why I put bread! Obviously meant breed. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
My guess is that it is an anti roll-back device and will be used for evacuation purposes. Don't forget this will be using 4x4 trains and not the usual Eurofighter 4x2 trains which means it is longer and also heavier. If you have seen an evacuation done on a Eurofighter you will see how hard and complicated it is as obviously the train is vertical not horizontal - like usual evacuations. I believe in the event of an evacuation the train will be able to disengage the lift and rollback slowly by using the said brake fins. Don't forget, this is a different bread of Eurofighter. Different trains, no beyond vertical drop, ect. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Fencing is going up underneath the Marmaliser just look to the bottom left of this picture: (Image taken from the Alton Towers Guide Facebook) (Image taken from the Alton Towers Guide Facebook) Also notice the new Toxic barrels that have been put on the Inoculator leg - fake theming pipes have also been joined on to the syringes. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Third leg going in: (Thanks to ThemeParkCollective) -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Gerstlauer have done two different lapbars so far - the first was Dare Devil Dive: As you can see, there are only two seats per row. The seats on The Smiler are not that spread out and look like Saw's in relation to gap between seats. To me it rules out the bar coming down the side. The bottom section of The Smilers restraints look nothing like DDD's also. The next type of Gerstlauer lapbar is the one on Iron Shark: Yet again, they look nothing a like. So to sum up, unless they are new lapbar type restraints then this will have OTSR. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Some images from today: Rising up from the first dive loop up towards the second: Going into the second dive loop: Trimmed bunny hill - hopefully the trims won't need to be used to much and we can still get a pop of airtime: (All images courtesy of The Alton Towers Guide's facebook page) -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
You are wrong. That footer may or may not be done, of which I am unsure. The footer that was a mistake happens to be near the toilets, across from it onto a grass verge - They have since filled this incorrect footer in. The reason they haven't completed that support is either they have yet to lay the footer, or what I personally think is the reason is that they still need access under it to put in a piece of track after the last section of Sea Serpent roll going into the bunny hill. They have previously done this with two different supports and when they have accessed the area they want they then put in the remainder of the support into the footer and connect it to the 'legless' support. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
As far as I know, the support with the missing 'leg' wasn't the one that had a footer wrong. The footer which was wrong was to do with the structure over the toilets and that footer is to the left of the toilet block. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Its and unusual place to put a sensor - in the middle of two inversions, high in the air. Some speculate that it is for judging the speed for the trims that will follow over the bunny hop into the cobra roll. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Posted at about 10 this morning: More safety barriers going in: New Smiler uniforms: Another track piece being put up (@ about 12PM) Making sure them bolts are tight!: Another piece being lifted into place (about 12PM): Sensor on the track - interesting: And a Panorama image for you: All images taken from The Alton Towers Guide Facebook page. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Thanks to JayJay90 (via his twitter) Thats 3 pieces of track that have been put up today and the day isn't over yet... They are also doing more work on the station and digging is happening at the top of the site. -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
Three major inversions are missing... 1) Dive Loop (following the first Inverting Drop) 2) Dive Loop (following the first Dive Loop) 3) Corkscrew/Inline (following the Cobra Roll) The dive loops are definitely in the final ride as they are on the plans and the AR image. The inversion after the cobra roll will be included too in my opinion. The section labelled 'Top Secret' has 7 hidden items located within - now it says: I don't think all 7 items are classed as being Worlds First, just that its telling you that a Worlds First will be revealed in May 2013. So I think 2 or 3 of the said items could be the three from above (the dive loops could be classed as one). So that still leaves 4 or 5 of them... -
Alton Towers Discussion Thread
Rollercoasters4Life replied to Ed's topic in Theme Parks, Roller Coasters, & Donkeys!
The Smiler Game App is now out on Itunes: https://itunes.apple.com/gb/app/the-smiler/id603103120?mt=8 It currently isn't up on Android.