Tmcdllr Posted October 29, 2014 Share Posted October 29, 2014 I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting Really?! You start an ebolaesque frenzy with the statement, "Interesting stuff going on at TC's construction. " And respond with, "I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting." Seriously?! Generally one would follow the statement, "Interesting stuff going on at TC's construction. ," with say... ...pictures of the workers installing glory holes to each individual seat of the ride vehicle. That I would find as, "Interesting stuff going on at TC's construction. " I agree and ... LOL!!! Link to comment Share on other sites More sharing options...
singemfrc Posted October 29, 2014 Share Posted October 29, 2014 To be honest, there are few rides at SFMM where I find it makes that much of a difference where you sit (unlike Scandia Screamer, which I just rode last night). With that said, I like: Apocalypse — Back as you'll get launched on the first drop, but the front provides a good "push" effect into some of the smaller hills. Viper — Back for a good whip off the lift, but front for a little bit of air after the loops. YOLOcoaster — Anywhere, for me, but I find the middle get's the best of everything that this ride has to offer (the loop, essentially). X2 — Front (which looks like the back in the station) for the excellent hangtime before the beatdown begins. Tatsu — Back for a good dropping sensation into the pretzel loop, but all the seats suck on this if you ask me. Goliath — Back for the first whiplash, but the front seat-view on this one is really good. Ninja — Front, otherwise you don't see much. Batman — Same as above. Riddler — Same as above. Superman — Doesn't really matter, but the arm-shield things on the sides are a bit awkward. Back seat doesn't have them. Green Lantern — I'd agree with the park bench suggestion. It's that bad. Revolution — Doesn't matter. It's going to hurt wherever you sit. Scream — Doesn't seem to matter. I much prefer the back row on YOLO for the excellent reverse hang time. I like the front row on Tatsu because I find the forces the same no matter where you sit and at least you get that spectacular view from the top of the mountain when you're in front. If you've never ridden Green Lantern or another ZacSpin and you don't consider yourself abnormally tall or short, then ride it at least once and see what you think. A lot of people find it very uncomfortable, but for some like me its not uncomfortable at all and I absolutely love it. Link to comment Share on other sites More sharing options...
rcdude Posted October 29, 2014 Share Posted October 29, 2014 Hi guys! I'm super excited that I'm finally going to the park this Sunday, but I wanted to know what are the seats I can´t miss. I´ve heard that the last row in Goliath is the best, but I don´t actually know, neither with the other coasters. Can somebody help me? Thanks! It's all up to personal preference, but my recommendations are... Apocalypse: Back (at night if possible) Batman The Ride: Front or Back (ride twice if possible) Canyon Blaster: Wherever won't disappoint a kid Full Throttle: Back Gold Rusher: Anywhere in the front half Goliath: Front (no airtime on drop, but more airtime on the floater hill and a slight benefit from the midcourse brakes) Green Lantern: Doesn't matter Ninja: Front Revolution: Everywhere's about the same, but you can brace better in the front Riddler's Revenge: Front Road Runner Express: Same as Canyon Blaster Scream: Front Speedy Gonzales Hot Rod Racers: Doesn't matter Superman: Doesn't matter, but the front usually has the shortest wait Tatsu: Front Viper: Front X2: Front for smoothest ride, Back for smoothest rotation (ride twice if possible) Link to comment Share on other sites More sharing options...
DiegoCC Posted October 29, 2014 Share Posted October 29, 2014 Thanks again for all the useful help! Link to comment Share on other sites More sharing options...
singforfood Posted October 29, 2014 Share Posted October 29, 2014 When I first rode Scream, I thought it was a BORE. Then I rode in the front row at night, and it was a total game changer. Link to comment Share on other sites More sharing options...
iloveblueberries Posted October 29, 2014 Share Posted October 29, 2014 I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting Really?! You start an ebolaesque frenzy with the statement, "Interesting stuff going on at TC's construction. " And respond with, "I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting." Seriously?! Generally one would follow the statement, "Interesting stuff going on at TC's construction. ," with say... ...pictures of the workers installing glory holes to each individual seat of the ride vehicle. That I would find as, "Interesting stuff going on at TC's construction. " I agree and ... LOL!!! I'm sorry No glory holes Link to comment Share on other sites More sharing options...
ioio Posted October 30, 2014 Share Posted October 30, 2014 The ride is far more braked now than when it first opened with the mid-course being necessary due to that helix, but it does seem like it almost stops you at the crest of the first drop now. Still, I think it's one of the best drops I've been on—far better than something like Skyrush which, to me, was little more than a violent slamming sensation. I might head over there on Saturday as I haven't checked out Fright Fest yet. It's going to be SUPER crowded on Saturday (if the previous Saturdays were any indication. re: Goliath .... that mid-ride block brake completely kills the Goliath experience for me.... they really need to reconfigure that ride somehow .... it's even worse than the brakes on the downside of the top hat on YOLO ... REALLY destroys that element for me :/ Goliath could also use an overbanked turn coming up from the drop too /rant over lol Link to comment Share on other sites More sharing options...
MagicMountainMan Posted October 30, 2014 Share Posted October 30, 2014 The last bent has been put up on TC to fill in the hole left by the fire. Now they are beginning on shaping the first drop and it looks steep! Also, when the rest of the structure gets a fresh coat of paint this ride is going to look GOOD. Link to comment Share on other sites More sharing options...
Manic Monte Posted October 30, 2014 Share Posted October 30, 2014 Ha. I keep forgetting that RMC will be constructing not just one steep drop, but two! Link to comment Share on other sites More sharing options...
ioio Posted October 30, 2014 Share Posted October 30, 2014 a lil' OT... Does anyone know why Tatsu doesn't have a secondary restraint mechanism (like a belt clipped onto the harness)? Obviously nothing will happen (right? LOLOL), but it seems weird that the bolt goes into the steel slabs in the armrests, and that's it :O Does anyone have very specific details on how these B&M flyer restraints work? the only part about Tatsu that freaks me out [not enough to not ride it of course, lol] Link to comment Share on other sites More sharing options...
Jew Posted October 30, 2014 Share Posted October 30, 2014 ^The seat belts are more for measuring if a large guests fits...they're not actually the failsafe mechanism. On B&M flyers the lapbar & OTSR portion both have ratchets, so something would have to go incredibly wrong for you to fall out. Link to comment Share on other sites More sharing options...
MrSum1_55 Posted October 30, 2014 Share Posted October 30, 2014 ^Right. If the seatbelts are made for size, my only question is of why they would not try another technique, like a seatbelt that clips on to the lap bar. Some of the older premier coasters have this. This sounds like it would be easier to check, and would still measure if it could lower far enough. I guess the issue is probably more with waste size itself than lowering the lap bar. Link to comment Share on other sites More sharing options...
Ridewatchers Posted October 30, 2014 Share Posted October 30, 2014 I might head over there on Saturday as I haven't checked out Fright Fest yet. Saturday is busy, as at least one other has said...have a look here. The park will be less busy on Sunday evening (which is the last day for Fright Fest). Link to comment Share on other sites More sharing options...
RandallDuell Posted October 30, 2014 Share Posted October 30, 2014 I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting Really?! You start an ebolaesque frenzy with the statement, "Interesting stuff going on at TC's construction. " And respond with, "I just saw some workers talking and funky looking stuff, nothing picture worthy so I just figured it was interesting." Seriously?! Generally one would follow the statement, "Interesting stuff going on at TC's construction. ," with say... ...pictures of the workers installing glory holes to each individual seat of the ride vehicle. That I would find as, "Interesting stuff going on at TC's construction. " Reminds me of your schtick in this thread. Unrelated, has there been any recent downtime on either of the Ful Throttle trains? Link to comment Share on other sites More sharing options...
SFMMGeek27 Posted October 30, 2014 Share Posted October 30, 2014 I might head over there on Saturday as I haven't checked out Fright Fest yet. Saturday is busy, as at least one other has said...have a look here. The park will be less busy on Sunday evening (which is the last day for Fright Fest). Actually, Saturday is the last day. I might head down there Saturday. It hopefully won't be too busy, considering it's after Halloween. Let's hope that most people don't know that it is still Fright Fest. Link to comment Share on other sites More sharing options...
colossus_queen Posted October 30, 2014 Share Posted October 30, 2014 during november, are saturdays any less crowded, since fright fest will be over with? Link to comment Share on other sites More sharing options...
Ridewatchers Posted October 30, 2014 Share Posted October 30, 2014 Gee...to think they would stop it before the weekend is over. Yes, Saturday is the last day. Friday is Halloween, so expect large crowds. Link to comment Share on other sites More sharing options...
Rotura Violenta Posted October 30, 2014 Share Posted October 30, 2014 Actually, Saturday is the last day. I might head down there Saturday. It hopefully won't be too busy, considering it's after Halloween. Let's hope that most people don't know that it is still Fright Fest. That was my thinking as well—people might be going to parties and stuff that night or might think it's over. Who knows? I might go . . . we'll see. Link to comment Share on other sites More sharing options...
colossus_queen Posted October 30, 2014 Share Posted October 30, 2014 well, I actually meant after fright fest is over Link to comment Share on other sites More sharing options...
rcdude Posted October 30, 2014 Share Posted October 30, 2014 during november, are saturdays any less crowded, since fright fest will be over with? Since most of them are still holiday weekends, they tend to be quite busy. If you go on a Saturday during the offseason that isn't a holiday period, however, they're usually not bad. Granted, the park isn't dead, but as long as it's not a holiday and there isn't any special event or promotion going on you probably won't see lines longer than 30 minutes. Link to comment Share on other sites More sharing options...
vedved82491 Posted October 30, 2014 Share Posted October 30, 2014 Not that this really matters right now, but I noticed when I rode Viper this past weekend that the trims after the first loop weren't activated and the trains were flying through the course. Was a nice change! Also Riddler was running incredibly smooth compared to the normal slight headbanging. Link to comment Share on other sites More sharing options...
Jew Posted October 30, 2014 Share Posted October 30, 2014 ^Right. If the seatbelts are made for size, my only question is of why they would not try another technique, like a seatbelt that clips on to the lap bar. Some of the older premier coasters have this. This sounds like it would be easier to check, and would still measure if it could lower far enough. I guess the issue is probably more with waste size itself than lowering the lap bar. I believe that the flyers don't need the seatbelt because the PLC is able to check whether or not it is locked. Older B&M's don't do that. Link to comment Share on other sites More sharing options...
ioio Posted October 30, 2014 Share Posted October 30, 2014 nm Link to comment Share on other sites More sharing options...
MrSum1_55 Posted October 30, 2014 Share Posted October 30, 2014 ^^Sorry about that. I was referring to coasters that had the seatbelts added on after installation, like YOLO or Goliath. Link to comment Share on other sites More sharing options...
RAWKIN_coaster38 Posted October 30, 2014 Share Posted October 30, 2014 I might head over there on Saturday as I haven't checked out Fright Fest yet. Saturday is busy, as at least one other has said...have a look here. The park will be less busy on Sunday evening (which is the last day for Fright Fest). Actually, Saturday is the last day. I might head down there Saturday. It hopefully won't be too busy, considering it's after Halloween. Let's hope that most people don't know that it is still Fright Fest. This is what I was thinking (hoping) too. We're gonna get our 2015 passes and possibly do Fright Fest as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now