gengutech

In some large attractions and parks, we can often see the figure of an Animatronic Dinosaur model, or open our teeth to dance, or maintain a good posture, can make vivid movements and make terrible sounds. Every summer is the season with the highest failure rate of animated dinosaurs, mainly due to sun exposure. Once the skin of the dinosaur is sunburned, it will cause internal moisture to enter and cause a series of problems. What materials are needed for repairs? What are the precautions? The following Animation Dinosaur Suppliers can introduce to you what problems you need to pay attention to when repairing dinosaurs?

Animated Dinosaurs

First, we need to understand the materials used to make the animated dinosaurs. The most common material is sponge silicone, which is characterized by softness and elasticity. And the touch is very real, just like touching a real creature. The motor and transmission structure are installed inside to make a dinosaur model with action function. However, the Simulation Dinosaur repair materials include fiber cloth, silicone glue, sponge, needle thread, acrylic paint, gasoline, eyeballs, teeth, motor, fuse, welding machine, cutting machine, utility knife, air compressor.

The maintenance method of the a Artificial Animatronic Dinosaur is: using the above materials, stitch the small area of the simulated dinosaur's epidermis with stitches, and then use silicone glue to evenly apply the sutures to prevent water from entering.

If the large area of the skin is damaged, you need to fill the sponge first, and then use silicone glue to adhere the fiber cloth to it, then brush a layer of silicone glue as a waterproof layer, and finally use acrylic paint to dilute it with an air compressor Combined with complementary colors of paint spray gun.

If the motor is damaged, the first step is to repair the motor. The method is to cut the skin with a utility knife, replace the motor that needs repair, and then perform the skin repair operation.

Maintenance precautions: When performing simulation dinosaur maintenance, you must pay attention to fire and heat protection. In some fractured areas of the steel frame, when you need to use welding operations, you must peel the skin over a large area to avoid sparks or heat generated by welding. The filling layer ignites.

Sometimes when the surface of the skin is repaired, there will be water and dust on the surface. It must be cleaned and then repaired. If conditions permit, the skin can be cleaned using the toilet cleaning. The maintenance effect is best after drying. When repairing Animated Dinosaurs, we must pay attention to fire and heat. In some steel frame fracture areas, when welding is required, the skin must be peeled off to avoid sparks or heat generated by welding. The sponge filling layer will be ignited. . Sometimes when repairing the epidermis, water and dust will accumulate on the surface. Please make sure to clean and then repair. If conditions permit, you can use the toilet to clean the skin. The best repairing effect after drying.

The above are the materials and precautions needed for the maintenance of simulated dinosaurs. If you do not want to repair yourself, you can contact us for professional and technical repairs, and you can complete the repairs efficiently and with high quality in a short time.